depth of cut वाक्य
उदाहरण वाक्य
मोबाइल
- Adjusting the depth of cut helps minimize kickback.
- Reducing the depth of cut will also help, but I recommend a minimal cut to begin with.
- Depth of cut is adjusted by light tapping with a small hammer at different points on the body.
- Giuliani regularly fought with the former schools chancellor, Ramon C . Cortines, over the depth of cuts to schools.
- The process of hydro-slotting perforation and the depth of cut is controlled by the working fluid supply, pressure and concentration.
- It enables the user to go from a maximum depth of cut of 6 inches way up to 12 inches.
- The expected compromise may include features of Bush's initial plan but not the depth of cuts that he initially sought.
- Recommended rake angles can vary depending on the material being cut, tool material, depth of cut, cutting speed, machine, and setup.
- It involves passing the workpiece under the wheel, without resetting the depth of cut, more than once and generally multiple times.
- Cutters sizes varies from 12 mm up to 200mm DIA and from 30 to 200mm DOC ( depth of cut ).
- The infeed table is adjusted so that it is lower than the outfeed table and this gives the depth of cut.
- Similarly, long cuttings were not viable and tunnels were excavated at much lessor depths of cut than would be adopted today ."
- While unhappy with the depth of cuts in both bills, the HMO industry prefers the House version, which allows higher payments in urban areas.
- The saw base can be adjusted for depth of cut and can tilt up to 45?and sometimes 50?in relation to the blade.
- Those provisions account for nearly half the dlrs 12 billion in the appropriations bill, increasing the depth of cuts to other programs and countries.
- A meltwater sluiceway with a depth of cuts through the Little Shickshinny-Rocky Run divide between the valleys of Rocky Run and Little Shickshinny Creek.
- The depth of cut adjustment moves the motor up or down on the baseplate so more or less of the blade projects through the cutting slot.
- Luis A . Miranda Jr ., the chairman of the Health and Hospitals Corporation, resigned in March after disagreeing with the Mayor over the depth of cuts in Medicaid.
- In addition, VoluMill makes dynamic adjustments to the axial depth of cut and / or the feed rate so as to never exceed a pre-set rate of material removal.
- In contrast with other types of High Speed Machining toolpaths, VoluMill toolpaths are typically run at axial depths of cut up to the full flute length of the Milling cutter.
- अधिक वाक्य: 1 2
depth of cut sentences in Hindi. What are the example sentences for depth of cut? depth of cut English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.