impact strength वाक्य
उदाहरण वाक्य
मोबाइल
- Best impact strength is obtained with somewhat lower sulfur contents around 30 %.
- ECTFE offers high impact strength even in cryogenic applications.
- Formability and impact strength can vary significantly when tested longitudinally and transversely to the grain.
- Ethylene-propylene rubber or EPDM added to polypropylene homopolymer increases its low temperature impact strength.
- Processability, impact strength and flexibility improves with a higher percentage of valerate in the material.
- As the melt flow increases, however, some physical properties, like impact strength, will decrease.
- The mask faceplate is a high impact strength polymer which is securely attached to the skirt or frame.
- Tempering is also performed on normalized steels and cast irons, to increase ductility, machinability, and impact strength.
- For example, the smaller particle sizes of MRP are known to increase the impact strength of certain plastic compositions.
- For example, Lehigh has stated that the smaller particle sizes of MRP increase the impact strength of certain plastic compositions.
- Epoxy resins are brittle and have poor impact strength and resistance to crack propagation, resulting in unsatisfactory levels of robustness and reliability.
- If polycarbonate is not dried before it is extruded, will the mechanical properties such as impact strength be degraded as it goes through the extrusion process.
- In recent years, the epoxy formulations used in composite prepregs have been fine-tuned to improve their toughness, impact strength and moisture absorption resistance.
- Solid nylon is used in hair combs and glass-filled variants which increase structural and impact strength and rigidity, and molybdenum disulfide-filled variants which increase lubricity.
- One of the first uses of austempered steel was in rifle bolts during World War II . The high impact strength possible at high hardnesses, and the relatively small section size of the components made austempered steel ideal for this application.
- It has a density of 1.17 1.20 g / cm 3, It also has good impact strength, higher than both glass and polystyrene; however, PMMA's impact strength is still significantly lower than polycarbonate and some engineered polymers.
- It has a density of 1.17 1.20 g / cm 3, It also has good impact strength, higher than both glass and polystyrene; however, PMMA's impact strength is still significantly lower than polycarbonate and some engineered polymers.
- However, on account of the limited size of particles that can be produced with the desired degree of sphericity and their low crushing and impact strength, the performance of prills during bulk storage, handling and use is generally ( with some exceptions ) considered inferior to that of granules.
- "' Polyetherimide "'( "'PEI "') is an amorphous, amber-to-transparent thermoplastic with characteristics similar to the related plastic PEEK . Relative to PEEK, PEI is cheaper, but is lower in impact strength and usable temperature.
- The basic tests measure the following parameters : wet tensile strength, cone jolt, mouldability, friability, moisture content, permeability, green compression strength, compatibility, loss on ignition, volatiles content, grain size & distribution, dust ( dead clay ) content, and active clay content, impact strength.
- अधिक वाक्य: 1 2
impact strength sentences in Hindi. What are the example sentences for impact strength? impact strength English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.