Capacitive loads are leading ( current leads voltage ), and inductive loads are lagging ( current lags voltage ).
12.
The second approach is to attempt to provide charge to the capacitive loads through paths that are not primarily resistive.
13.
This is done such that a leading current ( capacitive load, negative reactance ), results in positive reactive power.
14.
Unlike displacement power factor created by linear inductive or capacitive loads, this distortion cannot be corrected by addition of a single linear component.
15.
The objective of a pre-charge function is to limit the magnitude of the inrush current into capacitive loads during power-up.
16.
The collector-base capacitance, \ scriptstyle C _ { \ mu 3 }, of Q3 is one component of that capacitive load.
17.
There are also disadvantages : some amplifiers can oscillate when driving capacitive loads like most piezoelectrics, which results in distortion or damage to the amplifier.
18.
This transformer also multiplies the capacitive load that is inherent in electrostatic transducers, which means the effective impedance presented to the power amplifiers varies widely by frequency.
19.
Designer Bill Mensch has pointed out that F MAX is affected by off-chip factors, such as the capacitive load on the microprocessor's pins.
20.
This results in a . 1 ( 10X ) attenuation factor, but helps to isolate the capacitive load presented by the probe cable from the signal being measured.