The news feeds were triggered by a microswitch which was attached to a Western Union clock and tripped by the minute hand of the clock . and then reset the stepping relay.
12.
Two months after the accident, in November 1992, the Army issued a Safety of Flight message, warning that a recent accident investigation had identified a problem with a BUCS microswitch.
13.
A "'microdatacenter "'is a self contained data center in a very small enclosure consisting of multiple Microserver modules, at least one Microswitch module and storage modules.
14.
In electropneumatic designs, the trigger, instead of being mechanically linked to the action of the marker, simply activates an electronic microswitch ( or more recently, a magnetic or optical sensor ).
15.
The T . O . V . A . uses a USB-connected microswitch that is calibrated to the tester's computer screen, allowing for ? millisecond accuracy and avoidance of intrinsic delays in modern computers.
16.
Some consumer electronics with stereo RCA outputs have a microswitch in the red RCA output ( i . e ., the right stereo channel ) that disables merging of stereo sound into the white ( left stereo channel ) RCA output.
17.
The A-7A flap handle did not have the microswitch feature of later models that permitted the flaps to be slowly raised by several degrees per tap of the flap handle as airspeed slowly increased during max-weight takeoffs .)
18.
The visual T . O . V . A . uses two simple geometric figures and involves clicking the microswitch when the person taking the test sees the target figure and not clicking when it's the non-target figure.
19.
From 1978 to 1987, Dr . Biard worked as Chief Scientist of the Honeywell Optoelectronics Division in Richardson, TX . Dr . Biard started their MICROSWITCH IC & Sensor Design Center and served as a member of the Components Group Sensor Planning Team.
20.
This system used the same switches that actuated the original shifter, which were mounted on a collar on the steering shaft . The shift paddles pushed small pushrods which were in holes drilled in the quick release and protruded when the paddle was pulled to push the microswitch levers.
