Typical applications for alloy K-500 are : pump shafts and impellers, doctor blades and scrapers, oil-well drill collars and instruments and electronic components.
12.
An inlet tunnel 172 feet long to the river had been completed and was being lined with concrete and the pump shaft had been sunk to its full depth.
13.
To the East was Le Pelley shaft, excavated down to 90 fathoms below sea level, then the Pump shaft and the easternmost shaft, the Prince's shaft.
14.
The redesign kept the unusual waterpump arrangement, which consisted of a cast aperture in the block, and the pump shaft with bearing, seals and impeller pressed into the aperture.
15.
Polymerization also has been consequentially linked to catastrophic component failures such as injection pump shaft seizure and breakage, injector tip failure leading to various and / or combustion chamber components damaged.
16.
Hill's car crashed, Pollard's car broke down, while Leonard was leading with just a handful of laps to go when the a fuel pump shaft failed.
17.
If this procedure were not carried through, one might simply replace the fuse or the pump shaft . In that case, the problem would recur within a few months ."
18.
The other was that pump shaft vibration from the nearly 10, 000 RPM operating speed would cause the bearings to come out of their sockets, resulting in the pump abruptly seizing up.
19.
The pump shaft is made of steel, so why would the bearing be made out of something softer ? 192.168.1 . 1 5 : 38am, 28 November 2006 ( PST)
20.
For that purpose, a mechanical seal is mounted on the pump shaft . As the pump shaft is turning, there has to be a sealing element consisting of a stationary and a rotating ring.
