Such flux is termed " leakage flux ", and results in leakage inductance in series with the mutually coupled transformer windings.
12.
The transformer oil cools and insulates the windings, and protects the transformer winding from moisture, which will float on the surface of the oil.
13.
Some cathodic protection transformer-rectifier units are designed with taps on the transformer windings and jumper terminals to select the voltage output of the ICCP system.
14.
The resistance and reactance of the transformer windings and doorbell, as well as the turns ratio will effect the efficiency, output voltage, and output current.
15.
"' Copper loss "'is the term often given to heat produced by electrical currents in the conductors of transformer windings, or other electrical devices.
16.
The auxiliary system is powered via a separate transformer winding feeding three independent insulated gate bipolar transistor ( IGBT ) converters each providing a three-phase 400 volt system.
17.
Manufacturers specify much higher drain efficiencies, and designers are able to obtain higher efficiencies by providing current to the drain of the transistor through an inductor or a transformer winding.
18.
Products using this technology directly are automotive seatbelt springs, large power transformer winding strips, rotogravure plates, cable and hose clamps, gas tank straps, and window counterbalance springs.
19.
A dot marking convention, or alphanumeric marking convention, or both, can be used to denote the same relative instantaneous "'mutually inductive components such as between transformer windings.
20.
In this application where a neutral leg current flows due to a current imbalance between the generator or transformer windings due to a fault, it is limited in magnitude by the resistor.
