Cerium boride cathodes show lower evaporation rate at 1700 K than lanthanum boride, but it becomes equal at 1850 K and higher above that.
22.
While the process is about 30 % slower than with lanthanum boride, the cerium boride deposits are reported to be more difficult to remove.
23.
While the process is about 30 % slower than with lanthanum boride, the cerium boride deposits are reported to be more difficult to remove.
24.
Its existence demonstrates the importance of contamination in boride research because as little as 1 % of an impurity is capable of changing its crystal structure.
25.
The Air Vehicles Directorate has conducted a Quasi-static bending test results of functionally graded titanium / titanium boride test specimens which can be seen below.
26.
The lattice parameters of boride are a = 0.4061 nm, b = 0.5506 nm, and c = 0.2952 nm.
27.
"' Chromium ( III ) boride "'is an inorganic compound with the chemical formula CrB . It is used in wear resistant coatings.
28.
Scientists like Dr . Giovanni Grasso of Italy's National Institute for Physics of Matter Research have already squeezed out wires of magnesium boride up to 80 feet long.
29.
Many other compounds of rare earth elements can be used, such as samarium with boron-like europium and samarium boride, which is already used in the colour industry.
30.
The flux per unit area of certain permanent magnets, particularly Neodymium-Iron-Boride and Barium-Ferrite magnets, corresponds closely with the detection range of the Ampullae of Lorenzini.
