In contrast to the parallel shunt component, the series component in the circuit diagram represents the winding losses due to the resistance of the coil windings of the transformer.
22.
The magnets being out of phase in conjunction with the coil windings being out of phase put the guitar string signal from each pickup in phase with one another.
23.
The main advantage of the planar Rogowski current sensor is that the coil winding precision that is a requirement for accuracy can be achieved using low-cost printed circuit board manufacturing.
24.
As the circuit opens each time, the energy stored in the solenoid's magnetic field is released and by electromagnetic induction produces a pulse of high voltage in the secondary coil winding.
25.
No personnel were killed, but a certain amount of damage was done; indeed, the metal pillars of the coil winding department still bear the scars of bomb splinters from the attack.
26.
To minimize this weight several recent wheel motor designs have minimized the electrical steel content of the motor by utilizing a coreless design with Litz wire coil windings to reduce eddy current losses.
27.
Motor energy loss is mainly heat caused by many factors, including loss from the coil winding ( resistance ), loss in the rotor bars and slip rings, loss due to magnetising of the iron core, and loss from friction of bearings.
28.
As the textile industry went into decline during the Great Depression, Gilbert's interest increasingly turned to loudspeakers and audio reproduction, and following his decision, around 1932, to establish a loudspeaker manufacturing firm, Edna was to become his helper in cone assembly and coil winding.
29.
Because in most cases it is desirable to isolate coil-wound pickups from the unintended sound of internal vibration of loose coil windings, a guitar's magnetic pickups are normally embedded or " potted " in wax, lacquer, or epoxy to prevent the pickup from producing a microphonic effect.
30.
Flipper solenoids contain two coil windings in one package; a short, heavy gage'power'winding to give the flipper its initial thrust up, and a long, light gage'hold'winding that uses lower power ( and creates far less heat ) and essentially just holds the flipper up allowing the player to capture the ball in the inlane for more precise aiming.
