Modern surface grinders are semi-automated, depth of cut and spark-out may be preset as to the number of passes and, once set up, the machining process requires very little operator intervention.
22.
In civil engineering, a "'profile "'consists of a plotted line which indicates grades and distances ( and typically depths of cut and / or elevations of fill ) for excavation and grading work.
23.
Speeds, feeds, depths of cut, and temperatures at the cutting interface continue to rise ( the latter counterbalanced by copious cooling via liquid, air, or aerosols ), and cycle times continue to shrink.
24.
Built into each tooth is a depth gauge or " raker " which rides ahead of the tooth and limits the depth of cut, typically to around 0.5 mm ( 0.025 " ).
25.
For example, all depths of cut in lathe work must account for whether they apply to the radius ( that is, per side ) or to the diameter ( that is, total ).
26.
Certainly liberals are among those appalled at the depth of cuts in Medicare, and conservatives are happily at work opening up federal lands to loggers and slicing the Commerce Department into a half-dozen pieces.
27.
The forces during machining are dependent on depth of cut, feed rate, cutting speed, tool material and geometry, material of the work piece and other factors such as use of lubrication / cooling during machining.
28.
In turning, burnishing occurs if the cutting tool is not sharp, if a large negative rake angle is used, if a very small depth of cut is used, or if the workpiece material is gummy.
29.
Now I put the board on the infeed table of the jointer, adjust the depth of cut for a very small bite, and proceed to run it over the knives-- with the safety device in place.
30.
In turning and boring, the surface can be defined on either side of the depth of cut, that is, either the starting surface or the ending surface, with neither definition being " wrong " as long as the people involved understand the difference.
