In almost every case, under the same active grid voltage, the power that the generator produces is greater than the power it consumes when it is at the motor, fully loaded state, its rated power.
22.
The New York Independent System Operator maintains that in the absence of Indian Point, grid voltages would degrade, which would limit the ability to transfer power from upstate New York resources through the Hudson Valley to New York City.
23.
An unbypassed cathode resistor, common to both tubes, couples the signal to the cathode of the second amplifier, which is operated in " Grounded grid " mode, with the grid resistor bypassed by a capacitor which maintains a constant grid voltage.
24.
The grid voltage sends the electrons flowing into the open area between the emitters at the back and the screen at the front of the display, where a second accelerating voltage additionally accelerates them towards the screen, giving them enough energy to light the phosphors.
25.
In the example characteristic shown on the image, if an anode voltage V a of 200 V and a grid voltage bias of-1 volt are selected, a plate ( anode ) current of 2.25 mA will be present ( using the yellow curve on the graph ).
26.
Power is supplied to the SWER line by an isolating transformer of up to 300 kVA . This transformer isolates the grid from ground or earth, and changes the grid voltage ( typically 22 or 33 kilovolts line to line ) to the SWER voltage ( typically 12.7 or 19.1 kilovolts line to earth ).
27.
Since the suppressor grid voltage and not the screen grid voltage controls the screen current, if the suppressor and screen grid are coupled together with a capacitor ( " C2 " ) so there is a constant potential difference between them, increasing the screen grid voltage will increase the suppressor voltage, resulting in a decrease in screen current.
28.
Since the suppressor grid voltage and not the screen grid voltage controls the screen current, if the suppressor and screen grid are coupled together with a capacitor ( " C2 " ) so there is a constant potential difference between them, increasing the screen grid voltage will increase the suppressor voltage, resulting in a decrease in screen current.
29.
Since the suppressor grid voltage and not the screen grid voltage controls the screen current, if the suppressor and screen grid are coupled together with a capacitor ( " C2 " ) so there is a constant potential difference between them, increasing the screen grid voltage will increase the suppressor voltage, resulting in a decrease in screen current.
30.
Systems designed to deliver alternating current ( AC ), such as grid-connected applications need an inverter to convert the direct current ( DC ) from the solar modules to AC . Grid connected inverters must supply AC electricity in sinusoidal form, synchronized to the grid frequency, limit feed in voltage to no higher than the grid voltage and disconnect from the grid if the grid voltage is turned off.
