:: It's about 40 years old now, but the TV Series Connections ( TV series ) and its sequels from the 1990s covered exactly how sloppy and messy scientific progress is.
22.
A1 corresponds to a parallel connection and A2 to a series connection, with the understanding that making a distinction corresponds to changing how two points in a circuit are connected, and not simply to adding wiring.
23.
He played a barrister in some episodes of the ITV television series Connections ", a record company executive in " Breaking Glass " ( 1980 ) and an accountant in " Absolutely Fabulous ".
24.
Traction motors are connected with a series connection with voltage for each motor being 1500 V . They are cooled by two fans ( one fan for two engines ) with the air supplied by two intakes in the roof of the locomotive.
25.
Among Straus's technical achievements was devising an electrical series connection of a side-by-side pairing of two Neumann microphones ( omni and cardioid ) to create a broad or wide cardioid directional characteristic as a spot microphone, known as the'Straus Paket '.
26.
A bandpass mesh-type FSS sheet is a parallel connection of L, C and bandstop patch-type FSS sheet is a series connection of L, C and in both cases, the L, C values are determined from the center frequency and bandwidth of the filter.
27.
Because of the series connection and removal of wordline contacts, a large grid of NAND flash memory cells will occupy perhaps only 60 % of the area of equivalent NOR cells ( assuming the same CMOS process resolution, for example, 130 nm, 90 nm, or 65 nm ).
28.
So, this resonance phenomenon observed with dipoles and patches leads naturally to the notion of modeling them as a resonant circuit connected in parallel across a transmission line-in this case the element is a series connection of a capacitor and inductor, which produces a reflective short circuit at resonance.
29.
Lead-acid battery cells that are used to ignite a model engine glow plug, due to their two volt output when freshly charged, usually cause a regular 1.5 volt glow plug to burn out instantaneously, and either a resistor of the proper value and wattage, or a high-power germanium transistor's base / emitter junction ( in a series connection with one of the plug's terminals ) can reduce the lead-acid cell's voltage to a suitable 1.5 volt level for engine starting.
