The base has scales to help determine blade position on the work, and the kerf indicator is a simple, fixed notch.
32.
The simple one was, essentially, how big can one expect the kerf of a 10-inch table saw blade to be?
33.
As the raker pares the bottom of the kerf, a strip of wood is lifted upward, and curled forward into the gullet.
34.
With the left thumb against the side of the blade to support and guide it, draw the saw back to cut a starting kerf.
35.
The only way to avoid a disaster like this is to immediately jam something like a screwdriver blade into the kerf before the binding starts.
36.
A stream of oxygen is then trained on the metal, burning it into a metal oxide that flows out of the kerf as slag.
37.
This method works well for brazing, but higher-purity oxygen is necessary to produce a clean, slag-free kerf when cutting.
38.
It features a small stamped-steel baseplate, fixed kerf indicator, 50-degree bevel capacity, and it comes with a rip guide.
39.
As the saw is drawn out of the kerf, the wood that has accumulated in the gullets is allowed to fall out onto the ground.
40.
This feature enables the orthogonal cutting edge to efficiently transport wood-chips from the kerf, allowing subsequent teeth to perform a more effective cut.
