Tooling products manufactured by Omega include a complete line of fastener installation and removal tools, drills, countersinks, clamps, reamers and grinders.
42.
With a quarter-inch-hex shank, the countersink cutter can be held with a screwdriver handle of the indexable-bit type.
43.
Countersink the heads and leave the holes showing; after all, a wide pine board floor is informal, so the countersunk nails can show.
44.
If you use solid brass screws, you don't have to countersink them; the exposed screw heads become part of the bookcase's design.
45.
If you find pulling the old nails tedious and labor intensive, you could instead countersink them clear through the clapboard and fill the holes with wood filler.
46.
He laid out the tools required to build a handcart : saws, hammer, screwdriver, brace, tape measure, square, plane, and countersink.
47.
-- Pull the maverick nails and substitute solid brass screws of a bigger size, countersink, and leave them, or fill the holes with wood plugs.
48.
A Dan Martin Style " zero flute " countersink is a cone-shaped tool with a cutting edge provided by a hole that goes through the side of the cone.
49.
Whereas a counterbore is a " flat-bottomed " enlargement of a smaller coaxial hole, a countersink is a " conical " enlargement of such.
50.
Whatever timber you use, drill holes every 6 feet or so in them and drive 2-foot-long reinforcing rods into the holes and countersink them about an inch.
