After taking out the top and middle hinge pins ( the doors have three hinges ) the door starts to sag and almost falls off before I get a chance to remove the bottom or third hinge pin.
42.
After taking out the top and middle hinge pins ( the doors have three hinges ) the door starts to sag and almost falls off before I get a chance to remove the bottom or third hinge pin.
43.
A sailing rudder is usually tied or clipped to a simple pair of pintles ( hinge pins ) on the transom with the bottom pintle being longer so that the rudder can be mounted one pintle at a time.
44.
The breech block head could then be guided up and out through inclined guide ways in the receiver and the crank then could be freed from the hinge pin, allowing the entire breech mechanism to be removed as a unit.
45.
Hence, barrels with iron sights, barrels with telescopic sights, and even the hinge pin, are all simply gun parts, with no serial numbers, making the choice of changing cartridges from a multitude of rimfire, centerfire rifle and pistol cartridges, and even shotgun shells, very simple.
46.
Q : When I try to remove a hinged door, I find that after I remove the first hinge pin the door starts to sag off to one side so that removing the second or third hinge pin jams and becomes very difficult to pull out.
47.
Q : When I try to remove a hinged door, I find that after I remove the first hinge pin the door starts to sag off to one side so that removing the second or third hinge pin jams and becomes very difficult to pull out.
48.
As the rear surface of the body continued to exert pressure on the bearing surface on the front of the crank, the leverage exerted would cause the crank to move about 95 degrees upward from the horizontal on the fulcrum formed by it being attached to the rear of the receiver by the hinge pin.
49.
While the World War I pattern top cover hinge pin appears to have been retained on most converted M1917s, the later production M1917A1s had a positive locking top cover hinge pin that allowed the top cover to remain open lessening the chance of it dropping closed on one's hands while working on the gun this became the standard on all M1919 series guns.
50.
While the World War I pattern top cover hinge pin appears to have been retained on most converted M1917s, the later production M1917A1s had a positive locking top cover hinge pin that allowed the top cover to remain open lessening the chance of it dropping closed on one's hands while working on the gun this became the standard on all M1919 series guns.
