In fact, spikes " do " occur, both horizontally and vertically, and the corresponding horizontal blanking interval and vertical blanking interval give the deflection currents settle time to retrace and settle to their new value.
42.
In electrical engineering, a multiple of ? is called the " settling time ", i . e . the time necessary to ensure the signal is within a fixed departure from final value, typically within 10 %.
43.
There was also a three character address adder added, and the machine cycle was 15 microseconds, with six timing pulese, where sixth pulse was for settling time, thus the machine cycle was reduced to 12.5 microseconds.
44.
Often the settling time condition is referred to by saying the settling period is inversely proportional to the unity gain bandwidth, because 1 / ( 2? ? 2 ) is close to this bandwidth for an amplifier with typical dominant pole compensation.
45.
Tay, Mareels and Moore ( 1997 ) defined settling time as " the time required for the response curve to reach and stay within a range of certain percentage ( usually 5 % or 2 % ) of the final value ."
46.
However, the output is not ideal because of the frequency response of the amplifier, and overshoot ( how far the response exceeds final value ) and settling time ( how long the output swings back and forth about its final value ).
47.
Common considerations are the range over which the loop can achieve lock ( pull-in range, lock range or capture range ), how fast the loop achieves lock ( lock time, lock-up time or settling time ) and damping behavior.
48.
However, the asymptotes [ 1 & minus; exp ( " ?t ) ] and [ 1 + exp ( " ?t ) ] clearly impact settling time, and they are controlled by the time constants of the open-loop amplifier, particularly the shorter of the two time constants.
49.
By the early 1960s their capability against modern aircraft and missiles was limited; a lack of fast-reacting mounts, gunsight radars of limited accuracy, and long settling times for the fire control systems all meant that the guns were unlikely to be able to respond effectively against high-speed aircraft.
50.
So what does 125MHz here mean ? . The adds show this 125MHz in huge size fonts but looking at the settling time, it can't even exceed 33MHz . I hope you can understands what I'm trying to say . If anybody gets a click in their mind, plz do reply.
