Three bridges are incorporated into the causeway, the centre one being a Strauss trunnion Joseph Strauss, designer of the Golden Gate Bridge in San Francisco.
42.
The hub collects the load from the struts and transfers it across an interface to the trunnion pin, which is stationary and is connected to the dam.
43.
The bore was bored out to proper size, the exterior was turned smooth, the trunnions were turned on a trunnion lathe, and a vent was drilled.
44.
Typically, and in this case, the struts are oriented such that the trunnion friction stress is applied to the weak axis of the struts ( see Section modulus ).
45.
Navy : Used to gauge elevation on ships cannon, the quadrant had to be placed on each gun's trunnion in order to judge range, after the loading.
46.
The cylinder rocks slightly in operation to maintain alignment with the brake rigging cranks, so it is supported in trunnion bearings, and the vacuum pipe connection to it is flexible.
47.
In mechanical engineering, it is one part of a rotating joint where a shaft ( the trunnion ) is inserted into ( and turns inside ) a full or partial cylinder.
48.
The worm gear at the pivot clamp operated a pair of scissor arms, one on each side of the lifting frame to insert or extract the trunnion pins from the rocket.
49.
These last two models featured a thicker stamped receiver and bulged front trunnion, which was intended to strengthen the rifle in order to make it more suitable for frequent grenade launching.
50.
The nonrecoiling parts included the trunnion block group, the feed box and feeding mechanism, the recuperator cylinder and bushing, the back plate group, and the manual charger assembly.
