bolt face वाक्य
उदाहरण वाक्य
मोबाइल
- In the extremely unlikely event that a live round is on the bolt face, it is knocked loose with a cleaning rod or another rigid object.
- As dirt and fouling accumulate in the firing pin channel, the pin may begin to protrude from the bolt face, and the risk of slamfire increases.
- This ejection pattern was achieved by using a swiveling polymer tray, which intercepts the empty casing from the bolt face immediately after disengaging from the extractor.
- The bolt's operating cam then forces the bolt face to pivot downward, aligning a cartridge feed groove in the left side of the bolt with the chamber.
- Rearward movement of the chamber was limited to a short stroke to impact the bolt face, in effect making the floating chamber a short stroke gas piston.
- The telescoping bolt moves some of that mass forward of the bolt face, resulting in a bolt which is longer overall, but is shorter behind the bolt face.
- "' Action "': The M40 has always been based on the Remington 700 Short Action with . 308 bolt face, and this is no different in the M40A3.
- The telescoping bolt moves some of that mass forward of the bolt face, resulting in a bolt which is longer overall, but is shorter behind the bolt face.
- But none of these coaches, quarterbacks or bags of bolts faces the same pressure as Pete Carroll, the special individual with the future of USC football in his hands.
- Any short action rifle with a . 308 Winchester bolt face can be converted to shoot the 7mm GPC by having a qualified gunsmith chamber and install a new barrel.
- Rifles chambered for the cartridge required not only a longer action but also an oversized bolt face, all of which increased the cost of the rifle chambered for the cartridge.
- The cartridge casing is not sufficiently strong to contain the pressure of firing by itself; it relies on the walls of the chamber and the bolt face to help contain the pressure.
- This also gives the advantage of the firing pin indenting the primer in a similar fashion from shot to shot as the primer cup is in direct contact with the bolt face.
- This included a new adjustable trigger and a new bolt including a plunger-type ejector passing through the bolt face rather than the magazine-mounted, spring-loaded ejector that was part of Brewer's original design.
- The bolt face used in the Mauser Model 1893 was square whereas the Model 1895 s was cylindrical, this is due to the fact that the square face was unnecessary for reliable feeding.
- The cartridge retains the . 585 " bullet diameter but the case has been lengthened and the rim diameter reduced to fit bolt faces designed for cartridges similar to the . 416 Rigby.
- Headspace gauges are typically used by inserting the gauge into the bolt face engaging the extractor claw and then into the firearm chamber, and noting which gauge the bolt fully closes upon, and which it does not.
- More recently, new " magnum " cartridges introduced in the USA have been rimless or used rebated rims based on the . 404 Jeffery that fit the same . 512 " bolt face used for the belted cases.
- Weatherby's requirements included a bolt face which was countersunk into the bolt which would enclose the cartridge's casehead while the bolt head was enclosed in a counterbored barrel breach, which in turn would prevent the casehead from rupturing.
- With the machine tools available at that time, the dimensions that established the location of the bolt face and the depth of the chamber could not be held tightly enough to control the fit of the cartridge in the chamber.
bolt face sentences in Hindi. What are the example sentences for bolt face? bolt face English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.