crevice corrosion वाक्य
उदाहरण वाक्य
मोबाइल
- For example, in crevice corrosion, one has to consider the geometry of the crevice and the nature of the concentration process leading to the development of the differential local chemistry.
- For a given crevice type, two factors are important in the initiation of crevice corrosion : the chemical composition of the electrolyte in the crevice and the potential drop into the crevice.
- Researchers had previously claimed that either one or the other of the two factors was responsible for initiating crevice corrosion, but recently it has been shown that it is a combination of the two that causes active crevice corrosion.
- Researchers had previously claimed that either one or the other of the two factors was responsible for initiating crevice corrosion, but recently it has been shown that it is a combination of the two that causes active crevice corrosion.
- Crevice corrosion of type 316 stainless steel This photo shows that corrosion occurred in the crevice between the tube and tube sheet ( both made of type 316 stainless steel ) of a heat exchanger in a sea water desalination plant.
- Plastic hardware is sometimes used, but bronze and stainless steel are good corrosion-resistant materials for hardware, although stainless steel can be subject to crevice corrosion after many years especially in a boat using an outboard or other motor and must be inspected.
- If under-deposit or crevice corrosion is of primary concern, it is important to note non-uniformity of deposit thickness ( e . g ., deposit waviness ), localized fouling, packing of confined regions with deposits, creation of occlusions, " crevices ", " deposit tubercles ", or sludge piles.
- It consists of 11.9 % sulfuric acid, 1.3 % iron ( III ) chloride and 1 % copper ( II ) chloride boiling at 103 �C . The solution may also be used to define the critical pitting temperature ( CPT ) or the critical crevice corrosion temperature ( CCT ) of an alloy.
- The losses initially result from impaired heat transfer, corrosion damage ( in particular under-deposit and crevice corrosion ), increased pressure drop, flow blockages, flow redistribution inside components, flow instabilities, induced vibrations ( possibly leading to other problems, e . g ., fatigue ), fretting, premature failure of electrical heating elements, and a large number of other often unanticipated problems.
- अधिक वाक्य: 1 2
crevice corrosion sentences in Hindi. What are the example sentences for crevice corrosion? crevice corrosion English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.