filler metal वाक्य
उदाहरण वाक्य
मोबाइल
- The filler metal is brought slightly above its melting ( liquidus ) temperature while protected by a suitable atmosphere, usually a flux.
- The filler metal should be added quickly, and a large weld pool should be avoided to prevent dilution of the base materials.
- When the filler metal is properly added to the molten puddle, the resulting weld will be stronger than the original base metal.
- After the joint cools there is a joint line consisting filler metal and the metal of the two pieces that have been joined.
- Welders often develop a technique of rapidly alternating between moving the torch forward ( to advance the weld pool ) and adding filler metal.
- According to Ambrell Group Application Labs talking about filler metals : Silver is frequently used for induction brazing because of its low melting point.
- One of the main disadvantages is : the lack of joint strength as compared to a welded joint due to the softer filler metals used.
- The strength of the brazed joint is likely to be less than that of the base metal ( s ) but greater than the filler metal.
- Particularly thick plate will have a " J " shaped chamfer or " U " shaped groove to reduce the amount of welding Filler metal used.
- Complex joints, typically for jewellery or live steam boilermaking may be made in stages, with filler metals of progressively lower melting points used in turn.
- The welder must also keep the filler metal in the hot outer flame zone when not adding it to the puddle to protect filler metal from oxidation.
- The welder must also keep the filler metal in the hot outer flame zone when not adding it to the puddle to protect filler metal from oxidation.
- Soldering differs from gluing significantly in that the filler metals alloy with the workpiece at the junction to form a gas-and liquid-tight bond.
- The American welding society defines brazing as using filler metals with melting points over or, by the traditional definition in the United States, above.
- Brazing is another heat-treating process used to join two or more base metal components by melting a thin layer of filler metal in the space between them.
- The buttered layer can be the same alloy as the filler metal or a different filler metal that will act as a buffer between the two metals to be joined.
- The buttered layer can be the same alloy as the filler metal or a different filler metal that will act as a buffer between the two metals to be joined.
- "Brazing " is a joining process in which a filler metal is melted and drawn into a capillary formed by the assembly of two or more work pieces.
- Since the joint is produced using a metal with a lower melting temperature than the workpiece, the joint will weaken as the ambient temperature approaches the melting point of the filler metal.
- Ultrasonic welding uses ultrasonic energy to join parts without adding any kind of filler material while ordinary soldering uses external heating to melt filler metal materials, namely solders, to form a joint.
filler metal sentences in Hindi. What are the example sentences for filler metal? filler metal English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.