mean time between failures वाक्य
उदाहरण वाक्य
मोबाइल
- The hard disk drive's seek-error rate is at one per 107 physical seeks, while the mean time between failure ( MTBF ) is at about 400, 000 power-on hours.
- A MAID is usually constructed with low-cost Serial Advanced Technology Attachment ( SATA ) drives, which have shorter mean time between failures ( MTBF ) ratings than more expensive drives.
- :On early vacuum tube computers, the mean time between failure of the few thousand tubes ( valves ) was a practical limit on complexity ( as was power consumption ).
- These applications require the exceptional mean time between failures ( MTBF ) rates that solid-state drives achieve, by virtue of their ability to withstand extreme shock, vibration and temperature ranges.
- Problems with the reliability of early batches of transistors meant that the machine's mean time between failures was about 90 minutes, which improved once the more reliable junction transistors became available.
- DEAR DR . BOMBAY : Why should I have to back up my new hard drive when the manufacturer says that it has 300, 000 hours " mean time between failures "?
- The high complexity of the system, and the quality of tube-based electronics, gave the radars in the early Hawk systems a Mean Time Between Failures ( MTBF ) of only 43 hours.
- Hello, how much difference is that between M1A2 and Leopard 2 in the issue of ( MTBF ) mean time between failures ? talk ) 14 : 17, 14 December 2016 ( UTC)
- Electronic failure is governed by random processes, where "'Mean Time Between Failure "'identifies the average number of hours until failure occurs . "'Lambda \ lambda "'identifies the number of failures expected per hour.
- Since no attempt at repair is made, for a fixed mean time between failures ( MTBF ), replacement rates for consumption of consumables are higher than an equivalent item treated as a repairable part.
- As an example, if a system is built from 1, 000 individual computers each with a 3-year Mean Time Between Failure ( MTBF ), then the whole system will have an MTBF of 1 day.
- The drives were so unreliable that " Info " magazine joked, " Sometimes it seems as if one of the original design specs . . . must have said'Mean time between failure : 10 accesses .'".
- As for statistics, I agree that both prevalence rates for domestic violence and epidemiology make use of statistics; but so do " Mean Time Between Failure " rates for mechanical components, and they are not necessarily biomedical.
- Problems with the reliability of early batches of point contact and alloyed junction transistors meant that the machine's mean time between failures was about 90 minutes, but this improved once the more reliable bipolar junction transistors became available.
- :Note that, from our mean time between failures article : " For complex, repairable systems, failures are considered to be those out of design conditions which place the system out of service and into a state for repair.
- Many products have a mean time between failures ( MTBF ) of over 60 years ( based on Siemens calculation procedure ) and interoperability certificates with the leading manufacturers of core equipment ( i . e . Alcatel ).
- MTTR is often part of a maintenance contract, where a system whose MTTR is 24 hours is generally more valuable than for one of 7 days if mean time between failures is equal, because its Operational Availability is higher.
- The electronics were also upgraded, offering increased frequency agility and dramatically improving mean time between failure ( MTBF ) from about 62 hours in the-153 to 125 in the latest models of the-159, which have actually demonstrated 150 hours MTBF in the field.
- A booster might be fine for firing a weapon, or putting an unmanned satellite in orbit, but many components would be more expensive when they were upgraded to a reliabilty level, with longer mean time between failures, more thorough testing, and redundant backup systems.
- The design life of components and products differs from the items mean time between failure ( MTBF ), in that MTBF is a measure of the rate of occurrence of random failures in time where these failures are not due to a wear-out mechanism.
mean time between failures sentences in Hindi. What are the example sentences for mean time between failures? mean time between failures English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.