set screw वाक्य
उदाहरण वाक्य
मोबाइल
- Set screw collars are best used when the material of the shaft is softer than the set screw.
- In these designs, the Tune-o-matic bridge section is also usually fastened to its embedded studs by set screws.
- In this position, the rear sight is adjustable for elevation via a set screw under the sight arm.
- The nose, which screws into the body, is held by a set screw and contains the arming-firing device.
- Knurl point set screws should not be reused because the cutting edges of the knurls are deflected when tightened.
- It is common to machine small flats onto the shaft at the set screw locations to eliminate this problem.
- Fittings for non-threaded conduits are either secured with set screws or with a compression nut that encircles the conduit.
- You can bet Jim wouldn't be signing a requisition to buy set screws for $ 75 . 60 each.
- The position is fixed using a clamping mechanism based on a cam, a set screw or similar locking mechanism.
- The anchor plates are bolted to the wall and the escutcheons are fastened to them with hidden set screws.
- American sizes are defined in ASME standard B18.3-1998 " Socket Cap, Shoulder, and Set Screws ( Inch Series ) ".
- This account from Hallowell does not mention the Allen patent of 1910, nor the Allen safety set screw product line.
- The stopbar can either simply slip onto notches on top of the studs, or be held in place using set screws.
- Valve lash was adjusted by a simple set screw-and-locknut arrangement, and timing was taken care of by adjustment of the points'housing.
- The cable shield is soldered to the strain-relief spring which is held in the body of the connector with a set screw.
- Most bolts fall into the categories of machine bolts, stove bolts, carriage bolts, machine screws, set screws, specialty bolts and threaded rods.
- You'll also need a set of small allen wrenches, those L-shaped, six-sided metal bars used to loosen and tighten hidden set screws.
- Unscrew the brass cap at the bottom by loosening the set screw underneath it and turning it counterclockwise while holding the lamp base.
- This provides a standardized system that allows fins to be easily removed or replaced, utilizing set screws to hold the fins in place.
- Handles that lose traction can frequently be repaired by replacing or adjusting the set screw, which prevents them from slipping on the spindle.
set screw sentences in Hindi. What are the example sentences for set screw? set screw English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.