slip resistance वाक्य
उदाहरण वाक्य
मोबाइल
- Dry slip resistance is not an indicator of wet slip resistance in fact the two often vary inversely so reliable wet slip resistance testing is often needed as well as reliable dry testing.
- Dry slip resistance is not an indicator of wet slip resistance in fact the two often vary inversely so reliable wet slip resistance testing is often needed as well as reliable dry testing.
- The following technical characteristics are used to describe the covers : filament size, weave count, total weight, core weight, tear strength, tensile strength, adhesion, coefficient of friction, slip resistance, hydrostatic resistance, fire resistance and others.
- Dry slip resistance is not an indicator of wet slip resistance in fact the two often vary inversely so reliable wet slip resistance testing is often needed as well as reliable dry testing.
- Natural aggregate mix blends tested to BS 8204-6 : 2008 + A1 : 2010 Appendix B for slip resistance will, when installed correctly, provide a slip-resistant, permeable, decorative finish suitable for pedestrian and light vehicular traffic.
- Experience has shown that what is specified and ordered is not always what is delivered, and it is prudent for property owners to verify that flooring meets their slip resistance specification both before installation and at turnover of the property for occupancy.
- To assess a floor's slip resistance, a reliable, thoroughly researched ( in interlaboratory studies ) floor friction test method must be used, and then a minimum safety criterion ( 0.43, 0.60, 36, etc . ) is needed to apply to the results.
- The pendulum is now a standard test method for pedestrian slip resistance in 48 nations ( European Committee for Standardization EN 13036-4, 2003 names many of them ) on four continents and has been endorsed by Ceramic Tile Institute of America since 2001.
- If a building owner can be confident that his or her new flooring will sustain its slip resistance for a period of years this can protect a considerable investment in the flooring and prevent business interruptions as well as protect the safety of the pedestrian.
- If the DCOF falls within the 0.30-0.42 range, then the test method states that the flooring is " acceptable, with an increased probability of slipping, " and values below 0.30 are categorized as low slip resistance " and a " higher probability of slipping ".
- Standards Australia HB 197 : 1999 as well as Standards Australia HB 198 : 2014 give detailed recommendations / guidelines of minimum wet Pendulum Test Slip Resistance Values for many different situations : e . g . external ramps, 54; external walkways and pedestrian crossings, 45; shopping center food courts, 35; and elevator lobbies above external entry level may be 25 or less.
- The ratio of resin to aggregate should be at the optimal amount depending on the application and environment type, and stone type which should be dried mixed aggregate incorporating 1-3mm, 2-5mm and 5-8mm sizes to ensure that the aggregate gets sufficiently coated and also to meet the standard requirements when tested to BS 8204-6 : 2008 + A1 : 2010 Appendix B for slip resistance.
- अधिक वाक्य: 1 2
slip resistance sentences in Hindi. What are the example sentences for slip resistance? slip resistance English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.