thermal load वाक्य
उदाहरण वाक्य
मोबाइल
- This situation reduces the useful landed mass capability of entry, descent, and landing because an increase in thermal load leads to a heavier support structure and thermal protection system ( TPS ) of the aeroshell.
- 4 ) In cases where incandescent lighting was replaced with fluorescent, the HVAC system may have been designed for the thermal load of the incandescents, and may need to be retuned for the cooler fluorescents.
- Peltier ( thermoelectric ) cooler performance is a function of ambient temperature, hot and cold side heat exchanger ( heat sink ) performance, thermal load, Peltier module ( thermopile ) geometry, and Peltier electrical parameters.
- Additionally, injectors are also usually key in reducing thermal loads on the nozzle; by increasing the proportion of fuel around the edge of the chamber, this gives much lower temperatures on the walls of the nozzle.
- Conversely, frequent rearrangement of fuel within the core can balance the thermal load and allow higher fuel burnup, therefore reducing both the fuel requirements, and subsequently the amount of high-level nuclear waste for disposal.
- The building's large notches will also serve as shaded terraces for other areas of the tower and the exterior of the building will use low-conductivity glass to save on cooling costs by reducing thermal loads.
- The combination of beam conditioning devices controls the thermal load ( heating caused by the beam ) at the end station; the spectrum of radiation incident at the end station; and the focus or collimation of the beam.
- Aluminum and steel expand and contract at significantly different rates under thermal load, so a connection can become loose, particularly for older terminations initially installed with inadequate torque of the screws combined with creep of the aluminum over time.
- There is a tradeoff inherent in these two issues : by increasing the flow rate ( and the ability to remove greater thermal loads ), the vertical temperature gradient can be reduced, but this could increase the risk of drafts.
- This category is a compromise between the continuous and flash, having the disadvantage of the high power usage and relatively low intensities of the continuous simulators, but advantage of stable output intensity and spectrum and low thermal loads of flashed simulators.
- A conventional X-ray tube for mammography consumes 4.5-6 kilowatts, and calls for a Coolidge tube with a rotational anode in order to spread the thermal load from a single spot to the edge area of a spinning anode disc.
- One type of xenon arc lamp ( originally called the " Cermax " ), which is now known generically as the " ceramic body xenon lamp ", uses sapphire crystal output windows that tolerate higher thermal loads and thus higher output powers when compared with conventional Xe lamps with pure silica window.
- Combining these two orders of magnitude gains, the thermal load of 6.5 kilowatts reduces to a load below 100 watts, which can easily be managed in a stationary anode with a sharp focal spot well below 100 �m without active cooling, or at 40-50 �m with active air cooling to the tube anode.
- Fusible plugs are common in aircraft wheels, typically in larger or high-performance aircraft . The very large thermal loads imposed by abnormal landing and braking conditions ( and RTO notably ) can cause already high pressure in the tyres to rise to the point that the tyre might burst, so fusible plugs are used as a relief mechanism.
- The end-point of a given overclock is determined by parameters such as available CPU multipliers, bus dividers, voltages; the user's ability to manage thermal loads, cooling techniques; and several other factors of the individual devices themselves ( which the user cannot control, just " luck of the draw " if a part is a " good clocker " or not ) such as semiconductor clock and thermal tolerances, interaction with other components and the rest of the system.
- In addition to the overall scientific coordinating responsibilities, he developed many of the approaches and algorithms related to the mission : his innovation, insight and mathematical rigour impacted the optical and focal plane design, the instrument calibration, the scanning law, the attitude determination ( and the associated ` dynamical smoothing'), the double star analysis ( as observed via a signal modulated by a grid ), the effects of chromaticity and thermal load fluctuations, the optimum combination of the NDAC and FAST catalogue solutions, and the link to an extragalactic reference frame.
- The transmission target emission angle whose total X-ray fluence, mostly in line-emission, could be 250 times that of the Coolidge tube with kVp reaching 100kV . Most importantly, by making use of a greatly enhanced X-ray generating efficiency, the thermal load of a medical imaging unit such as mammography operating at 100kV without a spectrum shift, can be reduced from 6 kW to under 100 Watts, for example, thus providing the X-ray tube to deliver a sharper focal spot with much improved line-pair formation in the imager.
- अधिक वाक्य: 1 2
thermal load sentences in Hindi. What are the example sentences for thermal load? thermal load English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.