valve body वाक्य
उदाहरण वाक्य
मोबाइल
- If air collects in the valve body, the waterline lowers, as does the float, and the valve opens to release it.
- The lower side of the piston is an annular space surrounding the moving valve body and maintained at the lower ( Bernoulli ) water pressure.
- Tantalum is extremely inert and is therefore formed into a variety of corrosion resistant parts, such as thermowells, valve bodies, and tantalum fasteners.
- The screw remains captive on the valve body even when unscrewed fully; it is tightened again after the tire is inflated and the pump removed.
- It involves modifying the valve body separator plate and gaskets as well as changing or removing accumulator springs to alter the shift timing of the transmission.
- Hastelloy valves are often used in high temperature applications, such as nuclear plants, whilst glass-reinforced nylon are common plastics used for valve bodies.
- While lubrication to the overdrive unit was a challenge early on, this challenge was later overcome with factory improvements and / or aftermarket valve body kits.
- A small screw and captive nut on the top of the valve body permits the valve to be screwed shut and ensure that it remains tightly closed.
- The valve body is the hydraulic control center that receives pressurized fluid from the " main pump " operated by the fluid coupling / torque converter.
- In the Larner-Johnson valve a great advantage is that these forces are always balanced and act only within the valve body, not on its actuators.
- It is just underneath that odd-looking nut ( sometimes called a gland follower ) that fits round the spindle where it goes into the valve body.
- The transmission is very popular in the sport of drag racing today, with units equipped with manual valve bodies and transbrakes, some of which are air shifted.
- The C4 was also found with valve body in the empty hole, dropping the bolt in from the top and using the nut on the bottom / filter side.
- The top is then screwed back on, and the unit is pressurized with an air compressor via the Schrader valve located on the back of the main valve body.
- If the valve is blocked or stuck closed it may be necessary to release the pressure by removing the burst disc or drilling into the valve body below the valve seat.
- Between 1984-1987, internal components, from the ring gear to the oil pump housing, were updated, ending with the auxiliary valve body for 700s manufactured after October 1986.
- In the center of the exterior end is a metal pin pointing along the axis of the tube; the pin's end is flush with the end of the valve body.
- The multitude of parts, along with the complex design of the valve body, originally made hydraulic automatic transmissions much more complicated ( and expensive ) to build and repair than manual transmissions.
- This facilitates efficient cleaning of deposited sediments, replacement of seats and gland packings, polishing out of small scratches on the ball, all this without removing the pipes from the valve body.
- Much of the difficulty in staging a " clean " 2-3 or 3-2 shift in any cast iron Hydramatic was the changing elasticity of the governing springs in the valve bodies.
valve body sentences in Hindi. What are the example sentences for valve body? valve body English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.