stress component वाक्य
उदाहरण वाक्य
मोबाइल
- To further get values of each stress component, a technique called stress-separation is required.
- Several theoretical and experimental methods are utilized to provide additional information to solve individual stress components.
- In substitutional solid solutions, these stress fields are spherically symmetric, meaning they have no shear stress component.
- In such cases, stress components perpendicular to the plate are negligible compared to those parallel to it.
- Higher stress components in Hi-Points, like the barrel, chamber, breech and other small parts, are made of steel.
- Where, ?ij denote the stress components and the tensile and compressive allowable strengths for lamina are denoted by subscripts T and C, respectively.
- Due to GBT assumptions inherent to a thin-walled member, only 3 non-null stress components are considered in the formulations ( see Fig . 1 ).
- In two dimensions, the stress tensor at a given material point P with respect to any two perpendicular directions is completely defined by only three stress components.
- However, parts made from Zamak-3 in Hi-Point guns ( the receiver and bolt / slide ) are low-stress components that do not require the strength of steel.
- This could occur due to a region of space in which the stress component of the Einstein stress energy tensor is larger in magnitude than the mass density.
- In the same way, lines are traced from the Pole to points E, D, F, G and H to find the stress components on planes with the same orientation.
- The coordinates of the points where these lines intersect the Mohr circle indicate the stress components acting on a plane in the physical space having the same inclination as the line.
- The Mohr circle is then used to determine graphically the stress components acting on a rotated coordinate system, i . e ., acting on a differently oriented plane passing through that point.
- Constructed largely of light-alloys with stressed skins and steel high stress components the Cormoran had a conventional tail unit with tailplane attached to the extreme rear of the fuselage and fin also.
- The Mohr circle is then used to determine graphically the stress components acting on a rotated coordinate system, i . e ., acting on a differently oriented plane passing through that point ."
- A stress component is positive if it acts in the positive direction of the coordinate axes, and if the plane where it acts has an outward normal vector pointing in the positive coordinate direction.
- This way, the shear stress component \ tau _ { xy } is positive in the Mohr-circle space, and the shear stress component \ tau _ { yx } is negative in the Mohr-circle space.
- This way, the shear stress component \ tau _ { xy } is positive in the Mohr-circle space, and the shear stress component \ tau _ { yx } is negative in the Mohr-circle space.
- Even though the idea for using the Mohr circle is to graphically find different stress components by actually measuring the coordinates for different points on the circle, it is more convenient to confirm the results analytically.
- For the particular coordinate system ( x, y ) these stress components are : the normal stresses \ sigma _ x and \ sigma _ y, and the shear stress \ tau _ { xy }.
- अधिक वाक्य: 1 2
stress component sentences in Hindi. What are the example sentences for stress component? stress component English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.